Toffee Crunch Acrylic
Toffee Crunch Acrylic
In stock
Toffee Crunch
Please see "Misfits Acrylic" under Misfits & More to find this product.
Opacity: | Opaque |
Side 1: | Matte |
Side 2: | Glossy |
Colour: | Brown |
Material: | Cast Acrylic |
Thickness: | 3 mm (1/8") for all sizes |
Masking: | Paper |
Please allow a +/- 0.5" variation for length & width and +/- 10% variation in density.
Need a custom size? Please contact us for more information.
Glowforge Settings Recommendation
Glowforge Settings Recommendation
Suggested settings for 3 mm (1/8") thick acrylic:
To CUT: Power - FULL; Speed - 160
To ENGRAVE: Power - FULL; Speed - 1000
We recommend testing a small patch as each machine may perform differently. Settings should be adjusted accordingly if the patch test is not successful.
Please note that some acrylic settings (i.e. for glitters and marbles) might need to be adjusted by increasing power and slowing speed as they may be slightly thicker.
Care Instructions
Care Instructions
To avoid warping, store acrylic at no more than a 10 degree angle standing or lay flat with smaller pieces on top.