lyndecreekacrylic
Cosmic Christmas Marble Acrylic
Cosmic Christmas Marble Acrylic
In stock
Couldn't load pickup availability
Cosmic Christmas Marble blends red, green and white colours to create a swirl of Christmas with micro-glitter to add a touch of sparkle.
| Opacity: | Opaque |
| Side 1: | Glossy, Micro-glitter |
| Side 2: | Glossy |
| Colour: | Red, green & white |
| Material: | Cast Acrylic |
| Thickness: | 3 mm (1/8") for all sizes |
| Masking: | Paper |
Due to the unique manufacturing process, colour blends and style may vary. Minor imperfections, such as uneven surfaces due to trapped air bubbles during casting, are common with raw materials and are not considered defective.
Please allow a +/- 0.5" variation for length & width and +/- 10% variation in density.
Need a custom size? Please contact us for more information.
Glowforge Settings Recommendation
Glowforge Settings Recommendation
Suggested settings for 3 mm (1/8") thick acrylic:
To CUT: Power - FULL; Speed - 160
To ENGRAVE: Power - FULL; Speed - 1000
We recommend testing a small patch as each machine may perform differently. Settings should be adjusted accordingly if the patch test is not successful.
Please note that some acrylic settings (i.e. for glitters and marbles) might need to be adjusted by increasing power and slowing speed as they may be slightly thicker.
Care Instructions
Care Instructions
To avoid warping, store acrylic at no more than a 10 degree angle standing or lay flat with smaller pieces on top.
Share
