lyndecreekacrylic
Winter Cardinals
Winter Cardinals
In stock
Couldn't load pickup availability
Winter Cardinals
3 mm (1/8") thick printed sheets on acrylic. Please note that the printed side will come unmasked. Colour may vary.
***DISCLAIMER:***
If Clear is chosen as the base, only the image will appear (e.g., the white background you see in the product image will be "negative space" and will therefore appear clear/see-through).
Please be aware that prints with a white base will be more opaque than a clear base (clear base may allow for light diffusion).
Please allow a +/- 0.25" variation for length & width and +/- 10% variation in density.
Product Usage Recommendations
Product Usage Recommendations
Small prints best used for small projects such as jewellery, key chains, etc.
Glowforge Settings Recommendation
Glowforge Settings Recommendation
Suggested settings for 3 mm (1/8") thick acrylic:
To CUT: Power - FULL; Speed - 160
To ENGRAVE: Power - FULL; Speed - 1000
We recommend testing a small patch as each machine may perform differently. Settings should be adjusted accordingly if the patch test is not successful.
Please note that some acrylic settings (i.e. for glitters and marbles) might need to be adjusted by increasing power and slowing speed as they may be slightly thicker.
Care Instructions
Care Instructions
Our Beyond Acrylic should be cut with patterned-side up. We always recommend raising your acrylic slightly off the bed to prevent flashback. Please note that our Beyond Acrylic comes with one side unmasked. Masking before you cut is optional. We always recommend testing on a small patch prior to starting any projects to ensure correct settings are used.
We do not recommend using any alcohol-based cleaning solutions as it may affect the pattern quality. If you need to clean it, use either a microfibre cloth to polish or use warm soapy water and wipe gently.
Share
