lyndecreekacrylic
Silver Tinsel Fibers Acrylic
Silver Tinsel Fibers Acrylic
In stock
Couldn't load pickup availability
Silver Tinsel Fibers
| Opacity: | Opaque |
| Side 1: | Glossy |
| Side 2: | Glossy |
| Colour: | Silver tinsel in clear acrylic |
| Material: | Cast Acrylic |
| Thickness: | 3 mm (1/8") for all sizes |
| Masking: | Paper |
Disclaimer: Due to the thickness and composition of this style of acrylic, sheets will be slightly bowed. This is not considered a defect, but the nature of this type of acrylic. May contain pieces of thread between the acrylic and masking.
Please allow a +/- 0.5" variation for length & width and +/- 10% variation in density.
Need a custom size? Please contact us for more information.
Glowforge Settings Recommendation
Glowforge Settings Recommendation
Suggested settings for 3 mm (1/8") thick acrylic:
To CUT: Power - FULL; Speed - 160
To ENGRAVE: Power - FULL; Speed - 1000
We recommend testing a small patch as each machine may perform differently. Settings should be adjusted accordingly if the patch test is not successful.
Please note that some acrylic settings (i.e. for glitters and marbles) might need to be adjusted by increasing power and slowing speed as they may be slightly thicker.
Care Instructions
Care Instructions
To avoid warping, store acrylic at no more than a 10 degree angle standing or lay flat with smaller pieces on top.
Share
