1 2

lyndecreekacrylic

Misfits Acrylic

Misfits Acrylic

$23.00 USD
$28.00 USD $23.00 USD
Sale Sold out
Color
Size

Low stock

All sales from this listing are FINAL.

The products listed here (unless other specified) experienced a defect with the masking which leaves a glue residue on the matte sides of the acrylic. We found using an adhesive remover (such as Goo Gone) to be the best method for removing the residue. After removing the original masking, we recommend carefully cleaning and rinsing the affected sheets as per the instructions on the bottle. Please allow the sheet to dry before re-masking.

To learn more about the sheets listed here, please see their individual product listing.

-----------------------------

Clear BOGO: Buy 1 sheet, get the second 50% off! These sheets have slightly defective masking. 

-----------------------------

The Silver Foil and Iridescent Green sheets contain a manufacturing defect that left an uneven surface due to trapped air bubbles while the acrylic was being cast. Best used for pieces that can be cut around it.

Glowforge Settings Recommendation

Suggested settings for 3 mm (1/8") thick acrylic:

To CUT: Power - FULL; Speed - 160

To ENGRAVE: Power - FULL; Speed - 1000

We recommend testing a small patch as each machine may perform differently. Settings should be adjusted accordingly if the patch test is not successful.

Please note that some acrylic settings (i.e. for glitters and marbles) might need to be adjusted by increasing power and slowing speed as they may be slightly thicker.

Care Instructions

To avoid warping, store acrylic at no more than a 10 degree angle standing or lay flat with smaller pieces on top.

View full details